Posted By |
Discussion Topic: Potter Heigham Bridge Height Calculator
Similar Threads That Might Help :
Potter Heigham Bridge Height|
Potter Heigham Bridge Height|
Potter Heigham Bridge Height update|
Potter Heigham Bridge Height update|
potter heigham bridge heights|
-- Page:
1
2
3
4
|
|
dannyboy |
|
Mardles sometimes
Posts: 3166
Joined: Nov 2005
Add To Ignore List
|
We went up to check the boat on Saturday and it was firmly stuck in the cutting! Very low... Good job I wasn't planning a sail in a hurry!
Danny 'In Caelis et in aqua'
|
grandpamike |
|
Forum Regular
Posts: 189
Joined: Jun 2016
Add To Ignore List
|
Thanks for a very useful thread. Richard, the link to the Repps gauge in your sticky posted back in 2013 is now superseded. Here's the current one: Repps River Level
Grandpa Mike
|
Dreamweaving |
|
Forum Regular
Posts: 151
Joined: Jun 2016
Add To Ignore List
|
With all these measurements flying about, can anyone tell me how the measurements are taken.... I know the water surface is where the measurement is taken from... LOL Where is the second on an ARCHED bridge?... As I don't know of any boats with an arched top, matching the profile of the bridge's stone work...
|
hazel |
|
River Rat
Posts: 29
Joined: Oct 2012
Add To Ignore List
|
just to let you know we actually managed to get through the bridge on OCT 8th we were on Southern Horizon height 6ft6 the pilot got ud through even though the clearance was just showing slightly over that height we were almost alone very few boats therefor 4 nights cane back through 12th low water was at 430 but we got through no problem at 1240 it was a neep tide and the young pilot was taking boats through ar 6ft7 or less
|
Dreamweaving |
|
Forum Regular
Posts: 151
Joined: Jun 2016
Add To Ignore List
|
I'm informed that the bridge height displayed in the Pilots office is taken from a width of 6 foot and the marker by the bridge has been hit by boats so many times its not to be relied upon...
|
ADI |
|
Been Posting For a Long Time
Posts: 2204
Joined: Oct 2009
Add To Ignore List
|
Does anyone know if this formula still works, I have a feeling the site datum has changed since this was worked out.
Regards Adrian Michelle Beck Braydon and Mere.
|
ADI |
|
Been Posting For a Long Time
Posts: 2204
Joined: Oct 2009
Add To Ignore List
|
Thought i would add this as i thing the thread it was on was lost during site issues.
Regards Adrian Michelle Beck Braydon and Mere.
 View Full Size Image
|
vipergreen |
|
Newbie
Posts: 3
Joined: Sep 2019
Add To Ignore List
|
I have hired a 6’6’” boat mid September what’s the chances of getting under Potter Heigham bridge ?
|
Jeremy-Aslan |
|
Forum Regular
Posts: 943
Joined: Nov 2011
Add To Ignore List
|
6ft 6in - possible, but optimistic. If it were 6ft 3n, you'd have a much better chance. You would definitely have to be right on Low Water - soon after LW, the level goes up quite quickly. You say 'mid September' - On Mon 14 Sep, LW is 17.15 at Potter, which is right at the end of the day for the Pilot, any later in the week, it's well after office hours, or rather early in the morning. Have a look at the level for the gauge at Repps Here. Or search online for 'Repps River Gauge' Remember that 0.5m = 6ft clearance, so at the moment it is showing LW on 20-Aug 9pm as 0.3m - that's 20cm 'better' than 0.5, so a very tight 6ft 8in clearance - but also look how quickly it goes up, 6cm by 10pm; it may not sound much, but that would crunch the top off a 6ft 6in boat! Also, local knowledge may suggest that it goes up quicker at the bridge than a mile downstream where the gauge is. You'll also see that the 'trend' is upward at the moment, the river level is 1 or 2cm higher each day than the day before - on the 16th it was 0.22m = 28cm better than 0.5 = 6ft 11in clearance, loads of room! Check the levels AND the trend before you start your trip, to see if it's worth asking the pilot if you'll get through.
________________________________________________________ 'We demand rigidly defined areas of doubt and uncertainty' (HHGG)
|
oldhirer |
|
Newbie
Posts: 6
Joined: Feb 2020
Add To Ignore List
|
It depends where you have hired from. If hired from Martham you will probably get through.
|